CPR Products CPR Products Address And Phone Number
Click to Zoom

#1001 Express Injection Epoxy | More Detail
100% solids moisture insensitive epoxy designed to permanently restore structural strength to cracked concrete. Unique wetting properties allow for maximum penetration into cracks above 0.005.

Click to Zoom

#500 Bonding Epoxy | More Detail
Moisture insensitive epoxy that adds strength to concrete and affixes carbon fiber to walls.

Click to Zoom

#400 Bonding Epoxy | More Detail
100% solids moisture insensitive epoxy designed to permanently restore structural strength to cracked concrete. Unique wetting properties allow for maximum penetration.

Click to Zoom Click to Zoom

Carbon Weld 35/150 | More Detail
35 stitch-bonded uni-directional carbon Fabric is produced from continuous tow carbon fiber. Unique fiber spreading techniques are utilized to obtain the correct UD fabric weight.

Click to Zoom

#400 Epoxy Paste | More Detail
# 400 Paste is a low odor 100% solids, non sag epoxy paste used primarily for filling cracks prior to the use of the carbon weld kit. This paste has a 35 minute pot life. # 400 Bonding Epoxy can be applied for carbon fiber over lay without waiting for # 400 Paste to cure. (24 hours)

Click to Zoom

#551 Polyurethane Rigid Foam | More Detail
A two-part polyurethane injection material that produces a rigid, closed-cell foam. This hydrophobic grout product is used as an effective stabilizer in water-bearing soils and in void filling.

Click to Zoom Click to Zoom

Carbon Beam 35/150 | More Detail
35 stitch-bonded uni-directional carbon fabric is produced from continuous tow carbon fiber. Unique fiber spreading techniques are utilized to obtain the correct UD fabric weight.

Click to Zoom Click to Zoom

Heavy Duty Wall Angle Brace | More Detail
0.25" steel brace used in conjuction with Carbon Beam in order to eliminate wall movement. and reinforcement.

Click to Zoom

Complete Epoxy Injection Kit | More Detail
"The Complete Foundation Crack Repair Kit" includes all the materials and tools you'll need to epoxy inject a 3/64" x 10' crack; along with a comprehensive instruction manual, data sheets and product MSDS.

Click to Zoom

#1001 INJECTION EPOXY | More Detail
100% solids moisture insensitive epoxy designed to permanently restore structural strength to cracked concrete.

Click to Zoom Click to Zoom

#1001 TECH KIT | More Detail
10.5 oz. Dual Component / Single Cartridge
Fits standard size caulking gun
Comes complete with mixing rod and nozzle
Available in low viscosity

Click to Zoom

HYDRO FLEX S-C | More Detail
Hydro Flex is a single component, pre-catalyzed hydrophobic polyurethane chemical grout.

Click to Zoom

FLOOR FIX | More Detail
Floor Fix is an extremely fast curing, almost water-thin resin, effective in an any temperature down to -20F .

Click to Zoom

#315 MICRO FOAM POLYURETHANE RESIN | More Detail
#315 Micro Foam is a single component super low viscosity, hydrophilic polyurethane chemical grout.

Click to Zoom

Material Only Replacement Kit (EPOXY) | More Detail
Contractors epoxy injection kit
Includes:
3ea. #1001 LV tech kits
2 tubes of #602 epoxy crack paste A & B
20 surface mount ports
Instruction manual and MSDS and Data Sheets

Click to Zoom

#202 MULTIGROUT | More Detail
#202 Multigrout is a polymer solution which cures when reacted with water. It reacts freely with water in any proportion to form a strong film, gel or foam of polyurethane.

Click to Zoom

#900 HYDRO SEALANT | More Detail
#900 is a single component hydrophilic polyurethane chemical grout.

Click to Zoom

SURFACE SLICK | More Detail
Finishing agent for epoxy surface seal.

Click to Zoom

#10/60 EPOXY SURFACE SEALER | More Detail
#10/60 is a low odor 100% solids, non sag epoxy paste used primarily for sealing cracks prior to injection of #1001 injection epoxy or #900 injection urethane.

Click to Zoom

#602 EPOXY SURFACE SEALER | More Detail
#602 is a 100% solids, non sag epoxy paste used primarily for sealing cracks prior to injection with #1001 injection epoxy or #900 polyurethane resin.

Click to Zoom

Model #3334 300x300 | More Detail
300ml x 300ml Side by Side Dual Cartridge Applicator

Click to Zoom

5/8" E-Z Style Plastic Packers | More Detail
Zerk fitting tips allow for high pressure injection

Click to Zoom

STATIC MIXERS | More Detail
Motionless static mixers available in various sizes.

Click to Zoom Click to Zoom

UTILITY TROWEL | More Detail
#4045 Epoxy crack paste trowel

Click to Zoom

SURFACE MOUNT PORT | More Detail
Molded to fit 90 degree angle at foundation corners.

Click to Zoom

SURFACE MOUNT PORT | More Detail
Attach over foundation crack as port for injection repair material.


 
Copyright © 2006 CPR Products, Inc.